Automatic marking laser Marking Machine for Stainless Steel Copper Brass Aluminum
(Model:Man-30)
(Model:Man-30)
Product Description For Desktop Fiber Laser Marking Machine:
Desktop Fiber Laser Marking Machine adopts international most advanced technology and the laser source is fiber with Germany IPG technology, lifetime can reach 100, 000 hours, 8-10 years without any consumables and maintenance. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam. This is the best choice for the customers who have special requirements to the smallest & finest laser beam and character.
Product Features For Desktop Fiber Laser Marking Machine:
1. Best Marking Effect>> The laser beam of Desktop Fiber Laser Marking Machine is fine and thin. The Desktop Fiber Laser Marking Machine can provide the best marking effect among all the laser machine machines. Especially good in smallest character marking, such as mark on IC chip.
2. Deep Marking>> Desktop Fiber Laser Marking Machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3. Higher Accuracy>> Fiber laser can reach unto 0.001mm precision, while diode only 0.01mm.
4.10 Years Long lifetime>>We used the fiber laser module made by Germany IPG technology, the lifetime of the fiber laser device is 100, 000 hours, so the machine can be used for 8-10 years.
5. No consumables>> Desktop Fiber Laser Marking Machine can be used for 8-10 years without any consumables.
6. No need to adjust the laser path.
7. Free of Maintenance.
8. Use Integrated Air Cooling.
9. Low Power Consumption: Low cost, only 0.5kw/hour.
10. Small and compact: The volume of Desktop Fiber Laser Marking Machine is small, only 0.15 M3.
| Laser Source | |||||
| IPG Series | Pulsed, High Energy Ytterbium Fiber Lasers | ||||
| Mode of operation | Pulsed | ||||
| Polarization: | random | ||||
| Nominal average output power | 10w/20w | ||||
| Central emission wavelength: | 1060-1070 nm ,Q-switched operation Output power adjustment range 10%-100% | ||||
| Emission Bandwidth (FWHM) | <10 nm | ||||
| Long-term average power instability | <5% | ||||
| Pulse width, (FWHM) | 100 ns | ||||
| Laser switching ON time | 180 μsec | ||||
| Laser switching OFF time | 180 μsec | ||||
| Pulse Repetition Rate* kHz | 20-80 kHz | ||||
| Energy per pulse (PRR = 20 kHz) | 0.95 mJ | ||||
| Typical beam quality, M2 | <1.8 | ||||
| Output fiber delivery length | 3m | ||||
| Operating voltage: | 220V | ||||
| Max. Power consumption: | 600W | ||||
| Net Dimensions: | 70*20*50cm | ||||
| Laser system | |||||
| Scanning Speed: | 0-7000mm/s | ||||
| Marking Speed: | 0-5000mm/s | ||||
| Marking size: | 110mm×110mm (F-theta 160) | ||||
| Spot size: | ≤ 40 micron (F-theta 160) | ||||
| Cooling unit: | Air cooled | ||||
| Pilot laser: | 650nm diode laser, visible red light for marking guide | ||||
| Continuous working time: | ≥16h | ||||
| Humidity: | 45~85% (no condensation) | ||||
| Operating temperature: | 0~40°C | ||||
| Control units | CT-MARK (English Version) | ||||
Electronic Components | Resistance, capacitance, chips, printed circuit boards, computer keyboard. |
Apparatus And Meter | Panel signs, precision equipment ,etc., |
Instrument | Panel signs nameplates, precision equipment ,etc., |
Hardware Tools | Knives, tools, measuring tool, cutting tool, etc., |
Automobile Parts | Pistons, piston rings, gears, shafts, bearings, clutch, lights, etc., |
Mechanical Parts | Bearings, gears, standard parts, motors, etc., |
Daily Necessities | Handicrafts, zipper, key holder, sanitary ware, etc., |
Jewelry Rings | Jewelry, gold, silver,etc. |
Food,drinking packing | Plastic packings,etc. |
1) Free Training by VCD:We will supply the machine with <Training VCD> , <User's Manual> and <Instruction Book> in English for installing, operation, maintenance and trouble-shooting, and shall give technical guide by E-mail, fax, telephone, MSN, ICQ and so on, when you meet some problems of installation, using or adjusting.(Recommend)
2) Free Training Factory:You can send operator to laser marker factory for free training. Laser marker will offer professional guide for free.It is direct and effective face-to-face training.Here we have well-assembled equipments, all sorts of tools and testing facility.
Training Time:2-3 days (Recommend)
3) Our engineer can do a door-to-door instruction training service at your local site.We need your help to deal with the visa formality, prepaid traveling expenses and accommodation to us during the business trip and service period before their dispatch.It's better to arrange a translator for both of our engineers during the training period.
Quality Guarantee and After-sales Services
1)The guarantee period of quality shall be 12 months counting from the date on which the commodity arrives at the port of destination.Except the damage artificially and laser krypton lamp, we are responsible for offering the fittings free of charge during the guarantee period.While user is kindly requested to send the damaged fittings to us by courier with your charge before we send back the alternative fitting parts.After the guarantee of quality period, the parts required repairing or change, if any, shall be reasonable charged.
2)We will give technical guide by email, fax and telephone when user meets some problems on installation, operation, adjusting, maintaining.
3)We offer technical supporting to ensure safety using & maintenance for user:
Operation manual for installation, adjusting, operation, maintaining;
Professional marking software;
Operational marking software backup;
Quick supplement of key componentsUU with reasonable price.
Life-long after-sales service & consulting service to user.