Pocket-lint is supported by its readers. When you make a purchase through a link on our website, we may receive an affiliate commission. learn more

(Pocket-lint)-Laser engraving is not the easiest hobby for beginners, because it is inherently dangerous and requires large and expensive hardware. However, as a complement to the Ortur laser engraving machine series, the cutting-edge Ortur Laser Master 2 Pro makes the process safer, faster and easier than ever before.

Ortur Laser Master 2 Pro promises to make laser cutting and engraving a hobby for DIYers and beginners. Unlike most other engraving machines, it can be assembled in 15 minutes with minimal complications, thanks to the incredibly clear instructions.

Below, we focus on four factors that make Ortur Laser Master 2 Pro really shine.

Ortur Laser Master 2 Pro is very accurate. It is optimized with a 0.8mm x 0.15mm focal spot, which is one-fourth the size of other lasers with a usual size of 0.23mm x 0.23mm. Accuracy is crucial when engraving, and of course this device will not fail.

Its laser power control accuracy is up to one thousandth, using 12-bit precision PWM control signal, which means you can accurately reproduce the smallest details, which is very suitable for photo realism. In addition, the laser beam can cut and engrave plywood up to 9 mm.

This allows you to reproduce your ideas and designs with the highest accuracy on hard and dense objects.

The following is an overview of the features that support the best accuracy:

Ortur Laser Master 2 Pro is one of the fastest laser engraving machines on the market, and of course the fastest laser engraving tool for beginners! It is twice as fast as Laser Master 2 and three times as fast as most other engraving tools, making it ideal for professionals.

The speed mainly comes from Ortur Laser 1.5 series firmware, which increases the maximum speed from 4000mm/min to 10000mm/min. This basically means that you can carve nearly 400 inches of space in a minute!

In addition to firmware, this engraving tool can also maintain such a speed through a high-speed USB CDC interface. It supports a baud rate of up to 2,000,000, which greatly reduces the delay caused by command transmission, thereby reducing the engraving time.

The following is an overview of the functions that support faster engraving:

Ortur Laser Master 2 Pro is more reliable than most other engraving tools on the market. It adopts a fully modular structure, and only a dozen screws are needed for frame installation. In addition, it is also equipped with extremely detailed instructions for use, and with pictures, allowing beginners to assemble the equipment within 15 minutes.

One of the persistent problems with powerful laser engraving tools is that the body often shakes while working. However, the Laser Master 2 Pro has a full sheet metal and aluminum body, which can remain stable even when working at full load, thereby increasing the service life and life of the device.

Laser Master 2 Pro also has scale markings to guide you through ideal positioning and adjustment. And use the laser protective cover made of the same material as the laser glasses to ensure that your eyes are protected from laser damage. In addition, the cable of the device is very flexible and can withstand high temperatures.

The following is an overview of the features that support improved reliability:

Compared with the previous Laser Master 2, Ortur Laser Master 2 Pro has significantly increased its safety features. This change is noteworthy and essential, especially because Pro is designed for beginners and novices.

When the laser device is tilted or shifted, the active position protection will be triggered and the laser will be stopped immediately. This prevents the laser from shooting out of the target and possibly harming someone. In addition, even if the computer crashes or malfunctions during engraving, the equipment will automatically stop.

Laser Master 2 Pro is equipped with exposure duration detection, which means that when the motor has not moved for a period of time, the laser will automatically stop. In addition, when it detects a flame, it will immediately shut down and sound an alarm. You can also stop the machine immediately by pressing the emergency button.

The following is an overview of the features that support user security:

Due to technological advancement, we are rapidly approaching an era when workshop hobbies are becoming more and more accessible. In terms of laser engraving, Ortur Laser Master 2 Pro is undoubtedly in a leading position. You can pick up the goods directly from Ortur or Aliexpress.